Nippon Polyurethane Recoatable Finish (Gloss) has been developed to provide a highly durable gloss and colour retention topcoat finish, incorporating an extensive range of performance characteristics. Nippon Polyurethane Recoatable Finish (Gloss), applied over such proven priming systems, offers outstanding operational performance including abrasion, chemical and impact resistance and colour or gloss retention.
Nippon Acrylic 5170 Wall Sealer is a vinyl acrylate solvent-based sealer.It is specifically formulated to protect the finishing coats against the effects of alkalinity and moisture from the walls. Nippon Acrylic 5170 Wall Sealer is best used on interior and exterior walls, brickwork, plaster and asbestos-free substrates.
Product Features:
• Promotes better adhesion
• Good alkaline and efflorescence resistance
• Good for chalky and powdery surfaces
• For interior and exterior use
Product Features:
• Quartz Technology provides tough and hard paint film
• Excellent UV protection for longer-lasting colours
• Excellent protection against acid rain that results in a longer-lasting paint film
• Tougher resistance against alkaline and efflorescence from the substrate
• Tougher resistance against dirt penetration from the environment
• Excellent protection against fungus and algae
• Reduce the temperature of the selected colour range with a high SRI value
• 8 years of protection
• Green choice product
NIPPON PAINT SATIN GLO INTERIOR PAINT
Satin Glo is an acrylic-based paint with non-added lead and mercury which gives a luxury wall finish. It is a durable decorative finish specially formulated to provide a smooth mid sheen finish. It is washable and fungus resistant.
Product Features
• Long-lasting
• Washable
• Fungus resistant
• Good scrub resistance
• Can be used as chalkboard paint
Paint type : Water based
Product type : Interior
Finishing : Mid Sheen
Recommended Substrate : Masonry, brick, plastering substrate and fibre board
Drying time : Touch Dry 30 minutes / Hard Dry 1 hour
No. of Coat(s) : 2 coats
Theoretical Coverage : 9 - 11m² per liter per coat
Shelf Life : Up to 36 months in tight sealed container
EasyWash is a modified acrylic emulsion paint with non-added lead and mercury which gives a very smooth classical matt finishing for internal walls. It is specially formulated with Low VOC and Alkyd Phenol Ethoxylate free for interior walls. This affordable medium premium range paint has good stain washability, good hiding power, easy application and durable.
FlexiSeal Elastomeric Membrane is a mastic positive water proofing which formulated based on elastomeric styrene acrylic polymer for exterior application. It is a high build elastomeric styrene acrylic based membrane developed for exterior use.FlexiSeal Elastomeric Membrane which has good adhesion property is able to seal the pores on the concrete to prevent further water penetration into the substrate. It contains non-added lead and mercury.
Product Features:
• Water resistance
• Flexibility
• Cracks bridging
• Alkaline resistance
• Efflorescence resistance
• Environment-friendly green product
How to use:-
1) Surfaces to be painted must be cleaned thoroughly and dry.
2) It must be free from dirt, grease and other foreign matters.
3) Allow all surfaces to dry completely prior to painting.
4) Avoid painting when the moisture content and alkalinity of the walls are still high.
*Previously Painted Surfaces
(Remove all unstable paint film, loose chalk, dust and foreign matter. Make good any surface defects, clean off and dry. Do not paint on chalky or powdery surface.)
~Available in 2 colours: White (145) and Grey (146)
~Available in 1.3KG, 5KG and 20KG
NIPPON PAINT 5L EASY WASH PAINT
EasyWash is a modified acrylic emulsion paint with non-added lead and mercury which gives a very smooth classical matt finishing for internal walls. It is specially formulated with Low VOC and Alkyd Phenol Ethoxylate free for interior walls. This affordable medium premium range paint has good stain washability, good hiding power, easy application and durable.
Product Features
Good levelling
Good coverage
Good washability
Execellent hiding
Low odour & low VOC
MS Standard – MS 903: 1984
MS License – PC004443
Paint type : Water based
Product type : Interior
Finishing : Matt
Recommended Substrate : Masonry, brick, plastering substrate and fiber board
Drying time : Touch Dry 30 minutes / Hard Dry 1 hour
No. of Coat(s) : 2 coats
Theoretical Coverage : 10-12m² per liter per coat
Recoating Interval : 2 hours
NOTES:
1. The colours shown here are as close to actual paint colours as modern printing techniques allows. Due to different computer monitors/calibrations colours may vary slightly from the picture.
Slate Finish Gloss is a solvent based acrylic coating. It is specially formulated surface protective coating with added UV additive for treatment of interior and exterior slates, natural stone, cementitious substrate etc against staining, efflorescence and scratching. This coating will enhance the colour of material giving the surface a fine lustrous finish.
Perfect White is a vinyl acrylic copolymer emulsion paint with non-added lead and mercury paint, gives a very smooth classical matt finishing for internal walls. It is specially formulated with Low VOC for interior walls and ceiling. This high-quality paint is quick drying, good in hiding power, extremely white, easy to apply and durable. Product Description Perfect White is a vinyl acrylic co-polymer emulsion paint with non-added lead and mercury which gives a very smooth classical matt finishing for internal walls. It is specially formulated with Low VOC for interior walls and ceiling. This high quality paint is quick drying, good hiding power, extreme white, easy application and durable. Product Features: • Excellent hiding • Low odour & low VOC • Superior whiteness • Suitable for interior walls and ceiling • Matt finish Application Data Touch Dry / Hard Dry: 15 minutes / 1 hour Recoating Interval: 2 hours No. of Coat(s): 2 coats Theoretical Coverage: 9 - 11 m² per liter per coat #interior #wision #wisionpaint #nippon #perfectwhite #indoor #wall #paint #dinding #ceiling #putih #white Product Features: • Excellent hiding • Low odour & low VOC • Superior whiteness • Suitable for interior walls and ceiling • Matt finish
NIPPON PAINT 5L EASY WASH PAINT
EasyWash is a modified acrylic emulsion paint with non-added lead and mercury which gives a very smooth classical matt finishing for internal walls. It is specially formulated with Low VOC and Alkyd Phenol Ethoxylate free for interior walls. This affordable medium premium range paint has good stain washability, good hiding power, easy application and durable.
Product Features
Good levelling
Good coverage
Good washability
Execellent hiding
Low odour & low VOC
MS Standard – MS 903: 1984
MS License – PC004443
Paint type : Water based
Product type : Interior
Finishing : Matt
Recommended Substrate : Masonry, brick, plastering substrate and fiber board
Drying time : Touch Dry 30 minutes / Hard Dry 1 hour
No. of Coat(s) : 2 coats
Theoretical Coverage : 10-12m² per liter per coat
Recoating Interval : 2 hours
- • Affordable price
- • Reasonable durability against harsh weather
- • Good chalking and flaking resistance.
- • Non-toxic does not contain lead, mercury and heavy metals
- • Fungus and algae resistance
5L Nippon 5200 Interior Wall Sealer Undercoat
5200 Wall Sealer is a styrene acrylic water-based wall sealer. It is specially formulated for interior walls to protect the finishing coats against the effects of mild alkalinity and moisture from the substrate.
Application Data
Application : Brush, Roller
Touch Dry / Hard Dry : 15 minutes / 1 hour
Recoating Interval : Minimum 2 hours
No. of Coat(s) : 1 coat
Theoretical Coverage : 10 - 12 m² per liter per coat
Colour : White
5100 Wall Sealer is a styrene acrylic water-based wall sealer. It is specially formulated to protect the finishing coats against the effects of mild alkalinity and efflorescence.
Product Features:
• Good efflorescence resistance
• Good for new walls and repainting
• For exterior use
Application Data
Application : Brush, Roller
Touch Dry / Hard Dry : 15 minutes / 1 hour
Recoating Interval : Minimum 2 hours
No. of Coat(s) : 1 coat
Theoretical Coverage : 10 - 12 m² per liter per coat
NIPPON PAINT WEATHERBOND EXTERIOR PAINT
Nippon FLEX 200 is a single component, elastomeric, breathable, acrylic copolymer liquid apply waterproofing coating. It is air cured to form a seamless, UV-durable, protective waterproofing coating. It resists ageing from heat, UV, sunlight, rain, wind or frost and ozone. It resists water but allows water vapour to escape through it, and thus preventing blistering issue.
Uses: Nippon FLEX 200 is a basic waterproofing coating for old and new construction. It is suitable for above ground, interior and exterior waterproofing applications such as:
- RC roof, car porch roof, open roof terrace
- Balconies, A/C ledge, Overhangs, and etc
- Walls and RC fencing
- Asbestos
- Timber
- Asphalt/Bitumen
Advantages:
- Single component--no mixing required
- Easily applied--can be applied by non-skilled labour - Flexible--capable of bridging stationary cracks
- Barrier against salts and atmospheric gases
- High build--masking imperfections in substrates
- Waterproof-versatile and multi-purpose
- U.V stable--long service life and maintains its
- Anti Virus property reduces H1N1 and HFMD (Coxsackievirus A16) effectively
- Anti Bacterial property reduce common bacteria (E.Coli, MRSA and Staphylococcus Aureus) effectively
- Anti-Fungus and mould property
- Excellent stain removal property
- Ultra-low VOC
- Near Zero VOC during application and after painting
- Ammonia-free
- Non-toxic does not contain lead, mecury and heavy metals
- Environmentally friendly paint
- Long lasting colours