Code : HM-DB-7745A-ST

Size : L 840 x W 450 x D 230mm

Thickness : (Face)3.0mm + (Bowl)1.0 mm

Material : SUS304

Code : HM-DB-8445A-ST

Size : L 840 x W 450 x D 230mm

Thickness : (Face)3.0mm + (Bowl)1.0 mm

Material : SUS304

Brand               Johnson Suisse

Code                WBFA301315CP

Application Place              Bathroom

Finish                                Chrome

Installation Type                Deck Mounted

Type of Cartridge              Ceramic Headwork

Aerator type                      Coin slot PCA

Water Connection Thread               1/2"

Max. Cont. Working Pressure           500kPa

Min. Cont Working Pressure             100kPa

WELS Measure                                 4 Litres Per Minutes

WELS Rating                                     1 Tick

Product Description: NIPPON EA4 FINISH is a two-pack amine-adduct cured epoxy finish for use on steel and cement surfaces where chemical, oil and abrasion resistant coating is required.

∙Good resistance to mechanical damage and abrasion

.Excellent adhesion

∙Highly durable

1.  High Quality Ceramic Disc Catridge : Endurance tested against European Standard (500,000 cycles of cartridge)
2.  High Quality of Chrome Plating : High corrosion ressistance and long lasting shine (200 ours of salt spray test)
3.  Developed under stringet quality control processes
4.  Products complies with PUB Standard - Soft movement of faucet lever
5. Material : Non-hazardous alloy material approved under the "European Positive List"

Product Description

Voltage : 20V

No-load speed : 0-450/0-1900/min

Max.impact rate : 28500/min

Max.torque : 55NM

Chuck capacity : 2.0-13mm

Torque settings : 23+1+1

Auto lock keyless chuck

Mechanical 2-speed gear

Spindle lock function

20V Lithium Ion 2.0Ah batteries

With 2pcs battery pack

With 1pc 1Hr charger

Charge volts : 110V-240V~50/60Hz

The WD 3 V-17/4/20 is powerful and energy-efficient with power consumption of only 1000 W. The machine as well as the suction hose and the Clips floor nozzle are perfectly matched – for the best cleaning results on dry, wet, fine or coarse dirt. The wet and dry vacuum cleaner impresses with its compact design and a robust 17 l plastic container, 4 m cable, 2 m suction hose and its fleece filter bag. Thanks to the single-piece cartridge filter, it is possible to vacuum both wet and dry dirt without filter replacement. The blower function is useful for cleaning areas that are difficult to access. The hose is stored by hanging it on the machine head, thus saving space. The cable can be stored on the cable hook, tubes and floor nozzles at the bumper. The "Pull & Push" locking system allows the simple opening and closing of the container. The handle of the vacuum cleaner can be removed and the accessory can be connected directly to the suction hose. Also clever: Tools or small parts can be set down on the area on the machine head. The ergonomically shaped carrying handle enables comfortable transport.

• Features : Code WBFA301341CP
• Application Place Bathroom
• Finish Chrome
• Installation Type Deck Mounted
• Type of Cartridge Ceramic Headwork
• Aerator Type Coin slot PCA
• Water Connection Thread 1/2"
• Max. Cont. Working Pressure 500kPa
• Min. Cont Working Pressure 100kPa
• WELS Measure 4 Litres Per Minutes
• WELS Rating 1 Tick

Accessories Included:

1pcs cutting disc

1set carbon brushes

1pcs wrench

1. - Dirt blaster
2. - High-pressure hose, 6 m
3. - Detergent application via, Suction
4. - Vario Power Jet
5. - Wash brush
6. - Integrated water filter

Technical data

Length (m) 15

Weight (kg) 1.2

Weight incl. packaging (kg) 1.4

Dimensions (L x W x H) (mm) 250 x 250 x 80

A silicone acrylic based coating which can withstand continuous temperature up to 300°C. Excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.