RM10.90 - RM13.90 RM19.00 - RM22.00
Selleys Liquid Nails Mirror & Aluminium Glue Adhesive
Price RM10.90 - RM13.90 RM19.00 - RM22.00
Product SKU TRSAD00X
Brand Selleys
Size (L x W x H) 5 cm x 5 cm x 25 cm
Availability 1857
Size
Quantity
Description
Highlight
  • Premium grade, high strength construction adhesive.
  • Most suitable for mirrors and aluminum.
  • Heat and steam resistant.
  • High temperature & UV resistant
  • Will not discolor mirrors
  • Strong vertical hold
  • Non-corrosive
  • For interior & exterior use

SELLEYS LIQUID NAILS MIRROR & ALUMINIUM

 

Liquid Nails Mirror & Aluminium is a premium grade, high strength construction adhesive that has non-corrosive properties when being used on mirrors. Most other construction adhesives do not have this capability and will de-silver the mirror. Liquid Nail Mirror & Aluminum is heat and steam resistant which is important when fixing mirrors to walls in Bathrooms.

IDEAL FOR

- Mirror, Aluminium, Metal, Steel, Glass

FEATURES

- Heat & steam resistant

- High temperature & UV resistant

- Will not discolour mirrors

- Strong vertical hold

- Non-corrosive

- For interior & exterior use

DIRECTIONS

1. Ensure the surface is sound, dry, and free from oil, grease, and dust.

Application for mirrors:

2. For mirrors up to 6mm thick, apply strips of adhesive approximately 8cm apart. Do not apply adhesive within 5cm of the mirror edge.

3. Immediately after applying adhesive, place the mirror against the wall before adhesive skins (within 5 minutes).

4. When the mirror is pressed onto the wall, strips of adhesive must not spread into, or touch one another. A gap must remain between them.

5. Hold in place with temporary supports (e.g. with clips or tape) to maintain adhesive contact over the total bond area until sufficient adhesive strength has developed (normally after 72 hours).

6. Do not seal around the edges of the mirror for at least a week to allow air circulation.

7. Mirrors should not be fixed directly to unpainted timber, plaster, concrete, or brick walls. These surfaces should be painted to prevent potential damage to the mirror.

General Application:

1. Painted surfaces should not be flaky or peeling. Freshly painted surfaces should be allowed to dry for at least 7 days before the job is done. Test for compatibility on painted surfaces, before using.

2. Not for permanent water immersion.

3. Not for rigid bonds (eg. broken glass).

4. Adhesive requires air to cure.

5. Clean up while wet with mineral turps.

 

 

What's in the box

1x Selleys Liquid Nails Mirror & Aluminium Glue Adhesive