Nippon Paint
Nippon Paint
Sort by
Show result

Product Features:
• Quartz Technology provides tough and hard paint film
• Excellent UV protection for longer-lasting colours
• Excellent protection against acid rain that results in a longer-lasting paint film
• Tougher resistance against alkaline and efflorescence from the substrate
• Tougher resistance against dirt penetration from the environment
• Excellent protection against fungus and algae
• Reduce the temperature of the selected colour range with a high SRI value
• 8 years of protection
• Green choice product

RM350.00
RM480.00

Nippon 8000 Advance Wall Sealer

 

Excellent efflorescence resistance, good alkaline resistance, excellent hiding a, low odour and VOC, its green choice where its safer for your health and the sealer water-based.suitable for exterior.

 

Highlight:

> Excellent efflorescence resistance

> Low odour and VOC

> Suitable for exterior and interior

> For new & repainting wall

RM330.00
RM480.00

Product Features:
• Quartz Technology provides tough and hard paint film
• Excellent UV protection for longer-lasting colours
• Excellent protection against acid rain that results in a longer-lasting paint film
• Tougher resistance against alkaline and efflorescence from the substrate
• Tougher resistance against dirt penetration from the environment
• Excellent protection against fungus and algae
• Reduce the temperature of the selected colour range with a high SRI value
• 8 years of protection
• Green choice product

RM330.00
RM450.00

NIPPON PAINT SATIN GLO INTERIOR PAINT

 

Satin Glo is an acrylic-based paint with non-added lead and mercury which gives a luxury wall finish. It is a durable decorative finish specially formulated to provide a smooth mid sheen finish. It is washable and fungus resistant.

 

Product Features

• Long-lasting

• Washable

• Fungus resistant

• Good scrub resistance

• Can be used as chalkboard paint

Paint type : Water based

Product type : Interior

Finishing : Mid Sheen

Recommended Substrate : Masonry, brick, plastering substrate and fibre board

Drying time : Touch Dry 30 minutes / Hard Dry 1 hour

No. of Coat(s) : 2 coats

Theoretical Coverage : 9 - 11m² per liter per coat

Shelf Life : Up to 36 months in tight sealed container

RM330.00
RM440.00

Nippon Acrylic 5170 Wall Sealer is a vinyl acrylate solvent-based sealer.It is specifically formulated to protect the finishing coats against the effects of alkalinity and moisture from the walls. Nippon Acrylic 5170 Wall Sealer is best used on interior and exterior walls, brickwork, plaster and asbestos-free substrates.

 

Product Features:

• Promotes better adhesion

• Good alkaline and efflorescence resistance

• Good for chalky and powdery surfaces

• For interior and exterior use

RM320.00
RM480.00

NIPPON PAINT SATIN GLO INTERIOR PAINT

 

Satin Glo is an acrylic-based paint with non-added lead and mercury which gives a luxury wall finish. It is a durable decorative finish specially formulated to provide a smooth mid sheen finish. It is washable and fungus resistant.

 

Product Features

• Long-lasting

• Washable

• Fungus resistant

• Good scrub resistance

• Can be used as chalkboard paint

Paint type : Water based

Product type : Interior

Finishing : Mid Sheen

Recommended Substrate : Masonry, brick, plastering substrate and fibre board

Drying time : Touch Dry 30 minutes / Hard Dry 1 hour

No. of Coat(s) : 2 coats

Theoretical Coverage : 9 - 11m² per liter per coat

Shelf Life : Up to 36 months in tight sealed container

RM320.00
RM440.00

FlexiSeal Elastomeric Membrane is a mastic positive water proofing which formulated based on elastomeric styrene acrylic polymer for exterior application. It is a high build elastomeric styrene acrylic based membrane developed for exterior use.FlexiSeal Elastomeric Membrane which has good adhesion property is able to seal the pores on the concrete to prevent further water penetration into the substrate. It contains non-added lead and mercury.

Product Features:

• Water resistance

• Flexibility

• Cracks bridging

• Alkaline resistance

• Efflorescence resistance

• Environment-friendly green product

How to use:-

1) Surfaces to be painted must be cleaned thoroughly and dry.

2) It must be free from dirt, grease and other foreign matters.

3) Allow all surfaces to dry completely prior to painting.

4) Avoid painting when the moisture content and alkalinity of the walls are still high.

*Previously Painted Surfaces

(Remove all unstable paint film, loose chalk, dust and foreign matter. Make good any surface defects, clean off and dry. Do not paint on chalky or powdery surface.)

~Available in 2 colours: White (145) and Grey (146)

~Available in 1.3KG, 5KG and 20KG

RM300.00
RM400.00

NIPPON PAINT 5L EASY WASH PAINT

EasyWash is a modified acrylic emulsion paint with non-added lead and mercury which gives a very smooth classical matt finishing for internal walls. It is specially formulated with Low VOC and Alkyd Phenol Ethoxylate free for interior walls. This affordable medium premium range paint has good stain washability, good hiding power, easy application and durable.

Product Features

Good levelling

Good coverage

Good washability

Execellent hiding

Low odour & low VOC

MS Standard – MS 903: 1984

MS License – PC004443

Paint type : Water based

Product type : Interior

Finishing : Matt

Recommended Substrate : Masonry, brick, plastering substrate and fiber board

Drying time : Touch Dry 30 minutes / Hard Dry 1 hour

No. of Coat(s) : 2 coats

Theoretical Coverage : 10-12m² per liter per coat

Recoating Interval : 2 hours

NOTES:

1. The colours shown here are as close to actual paint colours as modern printing techniques allows. Due to different computer monitors/calibrations colours may vary slightly from the picture.

RM290.00
RM400.00

NIPPON PAINT 5L EASY WASH PAINT

EasyWash is a modified acrylic emulsion paint with non-added lead and mercury which gives a very smooth classical matt finishing for internal walls. It is specially formulated with Low VOC and Alkyd Phenol Ethoxylate free for interior walls. This affordable medium premium range paint has good stain washability, good hiding power, easy application and durable.

Product Features

Good levelling

Good coverage

Good washability

Execellent hiding

Low odour & low VOC

MS Standard – MS 903: 1984

MS License – PC004443

Paint type : Water based

Product type : Interior

Finishing : Matt

Recommended Substrate : Masonry, brick, plastering substrate and fiber board

Drying time : Touch Dry 30 minutes / Hard Dry 1 hour

No. of Coat(s) : 2 coats

Theoretical Coverage : 10-12m² per liter per coat

Recoating Interval : 2 hours

 

RM290.00
RM400.00

5L Nippon 5200 Interior Wall Sealer Undercoat

 

5200 Wall Sealer is a styrene acrylic water-based wall sealer. It is specially formulated for interior walls to protect the finishing coats against the effects of mild alkalinity and moisture from the substrate.

 

Application Data

Application : Brush, Roller

Touch Dry / Hard Dry : 15 minutes / 1 hour

Recoating Interval : Minimum 2 hours

No. of Coat(s) : 1 coat

Theoretical Coverage : 10 - 12 m² per liter per coat

Colour : White

 

RM235.00
RM320.00

5100 Wall Sealer is a styrene acrylic water-based wall sealer. It is specially formulated to protect the finishing coats against the effects of mild alkalinity and efflorescence.

 

Product Features:

• Good efflorescence resistance

• Good for new walls and repainting

• For exterior use

 

Application Data

Application : Brush, Roller

Touch Dry / Hard Dry : 15 minutes / 1 hour

Recoating Interval : Minimum 2 hours

No. of Coat(s) : 1 coat

Theoretical Coverage : 10 - 12 m² per liter per coat

RM235.00
RM290.00

Perfect White is a vinyl acrylic copolymer emulsion paint with non-added lead and mercury paint, gives a very smooth classical matt finishing for internal walls. It is specially formulated with Low VOC for interior walls and ceiling. This high-quality paint is quick drying, good in hiding power, extremely white, easy to apply and durable. Product Description Perfect White is a vinyl acrylic co-polymer emulsion paint with non-added lead and mercury which gives a very smooth classical matt finishing for internal walls. It is specially formulated with Low VOC for interior walls and ceiling. This high quality paint is quick drying, good hiding power, extreme white, easy application and durable. Product Features: • Excellent hiding • Low odour & low VOC • Superior whiteness • Suitable for interior walls and ceiling • Matt finish Application Data Touch Dry / Hard Dry: 15 minutes / 1 hour Recoating Interval: 2 hours No. of Coat(s): 2 coats Theoretical Coverage: 9 - 11 m² per liter per coat #interior #wision #wisionpaint #nippon #perfectwhite #indoor #wall #paint #dinding #ceiling #putih #white Product Features: • Excellent hiding • Low odour & low VOC • Superior whiteness • Suitable for interior walls and ceiling • Matt finish

RM230.00
RM495.00

NIPPON PAINT WEATHERBOND EXTERIOR PAINT

 

Nippon FLEX 200 is a single component, elastomeric, breathable, acrylic copolymer liquid apply waterproofing coating. It is air cured to form a seamless, UV-durable, protective waterproofing coating. It resists ageing from heat, UV, sunlight, rain, wind or frost and ozone. It resists water but allows water vapour to escape through it, and thus preventing blistering issue.

 

Uses: Nippon FLEX 200 is a basic waterproofing coating for old and new construction. It is suitable for above ground, interior and exterior waterproofing applications such as:

- RC roof, car porch roof, open roof terrace

- Balconies, A/C ledge, Overhangs, and etc

- Walls and RC fencing

- Asbestos

- Timber

- Asphalt/Bitumen

 

Advantages:

- Single component--no mixing required

- Easily applied--can be applied by non-skilled labour - Flexible--capable of bridging stationary cracks

- Barrier against salts and atmospheric gases

- High build--masking imperfections in substrates

- Waterproof-versatile and multi-purpose

- U.V stable--long service life and maintains its

RM210.00
RM300.00

Nippon Economy Undercoat is a quick-drying oil-modified alkyd based undercoat with good build.

 

Paint Type - Solvent based

Product Type - Interior & Exterior

Finishing - Matt

Recommended Substrate - Wood and Metal

Application - Brush, roller

Thinning - Thin with 5% of Nippon General Purpose Thinner

Conventional Air Spray - Dilute the paint with not more than 15 – 20 % of General Purpose Thinner

Airless Spray - The paint is ready for use after thorough stirring.

Touch Dry / Hard Dry - 12 minutes / 2 hours Recoating Interval - 4 hours No. of Coat(s) - 1 coat Theoretical Coverage - 9 - 11 m² per litre per coat

RM205.00
RM300.00

Tile Primer is two component water thinned epoxy primer barrier coating designed as a universal primer coating for many types of substrate, such as glazed tiles, glazed brickwork and smooth concrete floor. It is also suitable for use as a barrier / tie coat between ideal single pack coating and two pack solvent based top coats, such as Nippon EA-4 Finish or Nippon PU Recoatable Finish.

RM180.00
RM420.00