RM14.00 RM21.00
Selleys High-Temp RTV Silicone 85g (Gray) - Motor Gasket Gearbox Maker Oil Pump
Price RM14.00 RM21.00
Product SKU TRSSL045
Size (L x W x H) 100 mm x 30 mm x 150 mm
Availability 100
  • LOW ODOYR 低气味




Selleys Acrylic Wall Sealer Seals, conditions, and unifies surfaces, to provide a suitable foundation upon which the topcoats can be applied. It is formulated with 100% acrylic polymer, premium-grade titanium dioxide pigments, and special mineral fillers and additives, to ensure adhesion and performance of subsequent topcoats.


Ideal For :

- Crankshaft gasket, Oil pumps, Gearboxes, and pumps, Water pumps


Features :

- Forms gaskets instantly from the tube – any size, any shape.

- Instants gasket cures to a tough Silicone.

- Rubber which outperforms and replaces conventional paper, cork, or rubber gaskets.

- Instant gasket flows into every space or unevenness between surfaces perfectly for a tough and high-pressure seal.

- Resist high temperatures.

- Resist aging, water, oil, grease, and vibration.


How to use?

- Remove old gasket material from mating surfaces and clean with turpentine or petrol. If adhesion of the gasketing is not required, wipe mating surfaces with an oily cloth.

- Pierce blind seal in a tube, fit nozzle, and cut to the required size; eg. 3mm for stamped parts and 1.5mm for cast parts.

- Squeeze a bead of sealant onto one of the surfaces to be joined, around the perimeter of the part, and around bolt holes.

- Join the parts together within 10 minutes and bolt down to the desired torque. If the thicker gasket is required, assemble but do not tighten bolts for 24 hours. Material cures in 48 hours. (when disassembly is required, pry the two flanges apart and remove the old sealant before reassembly.).

- After use removes the nozzle and replaces the cap. Allow the sealant to cure in the nozzle and remove it before the next use.


Handy Tips :

Not recommended where temperatures exceed 343˚C/650˚F (such as exhaust manifolds) or for contact with gasoline or distillate. When eliminating cork gaskets, ensure that adequate clearance remains for mechanical parts, eg. valve rocker covers (in these cases do not fully tighten until the sealant has cured).


Safety Tips:

On contact, an uncured sealant can irritate skin and eyes. If in eyes, wash out immediately with water. The product releases acetic acid while curing. Keep out of reach of children.

What's in the box

1x Selleys High-Temp RTV Silicone 85g (Gray) - Motor Gasket Gearbox Maker Oil Pump